When it comes to Eleaf’s “iStick Pico”, the starter kit is a must-have for every store. For me, iPico is a “satisfactory product”. After searching for information online and doing various (ultimate) wasteful shopping, I finally found iPico.
Although iPico is like this, the number of turns I have is decreasing, so I decided to lend it to acquaintances who want to start VAPE. Fortunately, an acquaintance likes the rented iPico, several atomizers and the HiLIQ liquid that he regularly replenishes. He said that he has greatly reduced the number of cigarettes (no nicotine).
The coil is also a clearomizer with an RBA unit, and I rewind it regularly, so I feel spoiled when I think about the path of profligacy that I have followed since I started using VAPE. Nevertheless, I still feel that I did a good job, so I decided to destroy it and provide iPico, MELO3 and 18650 for free. In the future, you should purchase prefabricated coils and liquids yourself.
But, Mr. iPico, is it possible to set the warm-up through the latest firmware version upgrade? It seems very convenient. That’s why I bought it again.
We will mainly review from the perspective of comparison with non-branded Pico.
The introduction is already very long. There is a lot of information about iStick Pico everywhere, so it is no longer possible for a person like me to pounce the surface of the vape swamp from the ground with only shallow knowledge. So I will write briefly.
However, I bought “Mega”.
The smaller one is Uri, so why should it be bigger?
Why is the atomizer so big that it is only 23mm?
It was dumb and dumb, and after having a good time with iPico, I continued.
There are only negative impressions, for example, but I still chose a different impression.
The screen size of the OLED LCD is the same (compared to our company), but the window is larger. The USB terminal has been moved to the bottom. It is a welcome point for those who use the charger, and a troublesome point for those who use the mainframe to charge. The + button has become larger, but this is not a change in operability. It has a sleeve that can fill the gap, so it can be used with the 18650 (center of the photo). This choice will weaken the advantage of Mega, so you will buy 26650. The bottom is positive and contains a spring. Push the cover while turning it to set the battery. Obviously, the thread accuracy here is worse than the unmarked thread accuracy. Feeling of turning when caught. The adhesion of the metal powder produced in this way to the battery membrane is not good for mental health, so if you take it out and charge it, please clean the inside and check the battery membrane.
small. Except for the battery part, it is almost the same as the unmarked part (a few millimeters larger)
Light. It doesn’t make any sense to compare it with the unmarked mark, because it’s just a battery difference
Can use 26650 battery, can withstand high W and long time VAPE
Unmarked warm-up settings (firmware upgrade required) are also compatible with Mega, even
Using the Volkswagen suction cup, you can also comfortably activate the twist and Clapton coil.
Atomizer with a maximum diameter of 23 mm that can be connected
*The appearance of external connection can be realized by raising the bottom with a radiator.
Very cheap
Easy to grasp
I usually don’t use temperature control, I mainly use my own Clapton welding wire. For me who only has a 22mm atomizer, it has many advantages. Moreover, as shown in the fourth photo, the grip feels excellent when held.
The position of MOD No. 1 I usually bring out has changed from the long-existing “SD mini 75W” to “iStick Pico Mega”. In addition, due to the bulge of the battery part, the thickest part is increased by about 8 mm from the unmarked part, which may be an unacceptable problem for people who put the MOD in their pockets.For more information, please go to www.vapeciga.com